Learn to Design Your Own Boards
Anyone interested in working in electronics or designing electronic boards or products should learn the fundamentals of board design. Learning to design circuit boards with the correct software may open doors to many organizations, help you gain a well-paying career, and can be used to create highly complicated and sophisticated circuit boards.
Create a real board while learning the fundamentals of Altium Designer.
- Create your own diagram
- Layout and route your PCB
- Create the necessary documents for your PCB to be manufactured.
This course will teach you how to utilize the Altium Designer program. Altium Designer is a professional program that may be used to design a wide range of circuit boards, from simple circuit boards through motherboards and servers. It is one of the most widely used electronic design programs. Anyone interested in or already working in electronics can benefit from learning Altium. You'll begin by looking at the Arduino Uno reference schematic. You'll learn how to redraw the schematic, tweak it, and enhance it, as well as how to execute PCB layout. The training videos are step-by-step, and even if you are new to electronics or have never used Altium Designer before, you will be able to create your own board by repeating these procedures. You will have created all of the necessary documentation to manufacture the board by the conclusion of this course.
WHAT YOU WILL LEARN:
- After this course, you will design your own Arduino like board.
Rating: 4.6/5
Level: Beginner
Cost: $122 approx. (Full Lifetime Access)
Duration: 14.5 hours (approximately)
Enroll here: udemy.com/course/learn-to-design-your-own-boards
