Heat Storm Phoenix Infrared Space Heater
The Heat Storm Phoenix Infrared Space Heater can be mounted on the wall or positioned on a set of attachable feet to keep it out of the way. The Heat Storm Phoenix resembles an air conditioner with its thin shape and glossy gray or white plastic finish. It uniformly raised the temperature by 5 degrees Fahrenheit in a 15 × 10-foot room on its highest setting, which was comparable to the other space heaters. It uses 0.27 kWh of electricity, which is typical for a space heater.
To control and display the settings, the Phoenix incorporates a touch screen. It took a few readings of the handbook to figure out how to program it. The display is incredibly sensitive; you only need to touch it; if you press too hard, it will not turn on. The screen's brightness can be modified, which is convenient. You can use a timer to turn it on and off automatically. The item comes with a remote control, so you don't have to get up to operate it. However, because the remote is so little, it might easily get lost in the sofa's crevices. The surfaces of the heater get somewhat warmer than room temperature while in use, although they remain comfortable to touch.
This heater incorporates a child lock to prevent young fingers from unintentionally turning it on or tinkering with the settings, in addition to the tip over and overheat protection found on other heaters. This could be the finest space heater for you if you're short on space or don't want your heater to be underfoot.
SPECIFICATIONS
- Wattage: 1500
- Heat settings: 2 plus variable thermostat
- Weight: 25.4 pounds
- Dimensions: 12.8 X 11 X15.3 inches
- Heat element: Ceramic
- Safety features: Tip over protection, automatic shut off if it overheats, child lock
- Warranty: 1 year
REASONS TO BUY
- Heats very evenly
- Can be mounted on the wall or sit on feet
- Remote control included
- Child lock
REASONS TO AVOID
- Does not oscillate
- Heats the floor in use
PRICE: $129.99
BUY NOW: amazon.com/dp/B07JXRWJ8D
